Gear-Racking

Gear-Racking

 

Module racking at WPA is of the highest quality.  Proper module rear connectors are used - no soldering to edge contacts.  Modules have internal support as needed. Power furnished by audio-grade power supply with toroidal transformer for NO HUM. In most cases rack is designed so modules can be removed from front without opening chassis lid.

This pricing is a guideline. In some cases the price is less than that suggesting by the pricing guide.   Call or email for quote. 

Call for quote on larger racks

 

Basic 1U chassis for 1 self contained module (up to 2 voltages plus phantom power)

$500

Add  additional module (per module, up to 3 total)

$40

Add phantom power switching (per switch)

$30

Add pad switch (per switch)

$30

Add phase reverse switch (per switch)

$30

Add gain pot (high quality) (per pot)

$35

Add Hi-Impedance Input (op-amp based)

$65

Add Direct Input transformer

$75

 

 

Basic 2U chassis for 1 self contained module (up to 2 voltages plus phantom power)

$550

Add  additional module (per module, up to 4 total)

$40

Add phantom power switching (per switch)

$30

Add pad switch (per switch)

$30

Add phase reverse switch (per switch)

$30

Add gain pot (high quality) (per pot)

$35

Add Hi-Impedance Input (op-amp based)

$65

Add Direct Input transformer

$75

 

 

Pro Audio Gear Racking:  We'll Rack any module!

 

  • Virtually any console module or other audio module can be racked up for use in the studio or in the field. Here are a few samples of gear that has been racked up at World Pro Audio.​
     
  • WPA Module Racks have WPA internal power supplies fitted with toroidal transformers for zero added hum & buzz. Other racking outfits use off-the-shelf internal power supplies that don’t have toroidal transformers and thus often impart some hum in the outputs.
     
  • Most racks are built so that the modules can be extracted for service, making removal of the entire rack unnecessary. Quality parts and neat internal wiring round out the design so that service of the rack itself will be a rare occurance.

  • 1/4” jack hi-impedence inputs to modules can be added to any rack

click to see...

 

  • Product Code: Gear Racking
  • Availability: In Stock
  • $0.00

Tags: Gear_Racking,

Langevin 251 (black) x 2

Click to Enlarge →   FRONT       INSIDE 

Langevin 251 (silver) x 2

Click to Enlarge →   FRONT       INSIDE

Neumann PV76 x 2

Click to Enlarge →   FRONT       INSIDE    

Trident A x 2

Click to Enlarge →   FRONT           

Neve 1081 Mic Pre x 2

Click to Enlarge →   FRONT  

QE MP401 x 2

Click to Enlarge →   FRONT       INSIDE

Neotek Series 2 x 2

Click to Enlarge →   FRONT       INSIDE

Calrec AM6-17 x 2

Click to Enlarge →   FRONT       INSIDE 

Altec 9475 x 2

Click to Enlarge →   FRONT       INSIDE

API 312 x 2

Click to Enlarge →   FRONT   INSIDE

Helios Type 78 x 2

Click to Enlarge →   FRONT   INSIDE

Neve 1272 x 2

Click to Enlarge →   FRONT   INSIDE

Neve 1102 x 2

Racked_Neve_1102_front

Click to Enlarge →   FRONT       INSIDE

Neve 31099 x 2

Click to Enlarge →   FRONT       INSIDE

Siemans V72 x 2

Click to Enlarge →   FRONT 

Spectra Sonics IM6 x 2

Click to Enlarge →   FRONT  

Neve 1272 x 4

Click to Enlarge →   FRONT       INSIDE

Electrodyne 711 x 2

Click to Enlarge →   FRONT   

Neve 1073 x 2

Click to Enlarge →   FRONT  

Langevin 252 x 2

Click to Enlarge →   FRONT       INSIDE

Trident B x 2

Click to Enlarge →   FRONT       INSIDE

Quad Eight 444 x 8

Click to Enlarge →   FRONT       INSIDE

Quad Eight 333 & 444 x 2

Click to Enlarge →   FRONT       INSIDE

Auditronics IME-110

Click to Enlarge →   FRONT       INSIDE   

Sidecar Harrison 32 x 8

Click to Enlarge →   FRONT       INSIDE 

Trident A x 8

Trident A Range modules, rack of 8

Click to Enlarge →   FRONT       INSIDE